12v 100w Driect Drive Steering Motor Automatic Driving System for Precision Agriculture
You are here: Home » Products » Brushless dc motor » Brushless dc motor » 12v 100w Driect Drive Steering Motor Automatic Driving System for Precision Agriculture
Add : shizhong District,jinan city,shandong province
Phone : +86-13255318005
E-mail : zhibi@jnzbi.com
Q
Q : 813647380
Skype : cherry@jnzbi.com
Share to:

12v 100w Driect Drive Steering Motor Automatic Driving System for Precision Agriculture

Motor: 12v 100w 100rpm
Continuous current 25A, maximum peak current 50A (1s)
DC working power +9~18vdc
Working mode: speed mode, torque mode
Quantity:
  • 185DD0101-10
  • ZHIBI

Motor: 12v 100w 100rpm

Continuous current 25A, maximum peak current 50A (1s)

DC working power +9~18vdc

Working mode: speed mode, torque mode

speed mode, position mode;

1.3. Conditions of use

1.3.1 Power supply:

Rated working power: 12vdc

Limit power supply range: 9--18vdc

t can provide instantaneous current overload capability of 2 times continuous current

1.3.2 Feedback component:

Incremental encoder (conventional product), absolute encoder(if you need absolute encoder, please advise in advance).

1.3.3 Use environment:

Operating temperature: -25~55°C (based on environment temperature);

Storage temperature: -35~65°C (based on environment temperature);

Humidity: 5%--90%RH, condensation (25°C)

Protection level: IP65,

Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The insulation resistance is 20 MΩ or more.

Three-proof requirements: meet the requirements of three defenses (dust, moisture, salt spray).

Vibration requirements: Frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g. 

Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.

Horizontal, vertical, and longitudinal directions are 30 min in each direction.

Cooling method: natural cooling

 

Product performance

 

Parameter

Label

Parameter value

unit

Voltage

U

9-18

VDC

Maximum continuous current

Ic

25

A

Maximum peak current

Imax

50 (1s overcurrent protection)

A

Pwm switching frequency

fpwm

10

kHz

Output encoder power supply

+5Vout

5

VDC

Icc

100

mA

Digital input

EN,DIR

  Cutoff (high level): less than 1mA

Brakeover (low level): 3~7mA

mA

Analog input impedance

Single-ended input

20

Analog signal voltage

Single-ended input

0~5V

V

Under voltage protection

Vu

9

V

Over voltage protection

Vo

18

V

Operating temperature

Industrial grade (standard product)

-25 ~ +55

Military grade

-40 ~ +65

Storage temperature

Industrial grade (standard product)

-35 ~ +65

Military grade

-55 ~ +85



Home

Add : shizhong District,jinan city,shandong province   Phone : +86-13255318005   E-mail : zhibi@jnzbi.com
QQ : 813647380   Skype : cherry@jnzbi.com
Copyright  Jinan Zhibi Electronic Co., Ltd. All rights reserved.  Support by sdzhidian